- The boots are made by injection molding with a sole made of polyurethane and rubber based on nitrile rubber.
- Natural leather with a thickness of 1.8–2.0 mm is used as materials for the upper of shoes. The semi-blind tongue valve prevents the entry of snow, small objects, splashes, and dust; it is made of natural leather and textile material that is abrasion-resistant and has water-repellent properties.
- The cuff (soft edge) made of material with water-repellent properties creates comfort and convenience to wear.
- Lining and insole made of natural Alaska fur (pile height 14 mm).
- There is a finish made of reflective material.
- For protection in the forefoot, internal protective socks made of composite material with an impact strength of 200 J (MIL 200) are used, equipped with a gasket that prevents the upper edge from pressing on the foot.
- The sole is two-layer (resistant to chemical factors – oil, petroleum products, acid solutions with concentrations up to 20%, alkali solutions with concentrations up to 20%).
- The top layer of polyurethane has shock-absorbing properties, absorbs shock loads, and also gives the shoes lightness, comfort and increased heat-protective properties.
- The bottom layer is made of wear-resistant, heat-resistant (with short-term (60 sec.) contact with heated surfaces up to 300°C), frost-resistant (–45°C) nitrile rubber, resistant to deformation and abrasion.
- The depth of the profile (tread) of the running layer of the sole is 5 mm and the elements of the sole provide protection against slipping on greasy, wet surfaces, and the angled tread pattern ensures self-cleaning of the sole from dirt.
- The full-size characteristics of the lasts used in the production of shoes ensure comfortable wearing and allow you not to feel tired throughout the entire working day.
Men's leather boots Neogard-2 with a lining made of natural fur, complete with clothing and other personal protective equipment that provides proper thermal insulation, are recommended for use in I-II, III, IV and Special climatic zones.
Shoe upper: genuine leather.
Lining: natural fur.
Protective toe: composite material (MIL 200).
Sole: PU/nitrile rubber.
Fastening method: injection molding.
Color: black.
Sizes: 41 to 50.
TR CU 019/2011