TECHNOGARD-2
insulated high ankle leather boots with inside composite toe cap, non-metallic anti-puncture midsole

• Boots are manufactured by direct molding of the polyurethane and nitrile rubber sole.
• The shoe upper is made of  genuine leather (1.8–2.0 mm thick).
• The 29.5 cm high shaft has an adjustable width with buckle fastener; genuine leather flap.
• Lining – multi-layer insulation: faux fur on a knitted base with wool pile (70% wool, 30% polyester, density 640 g/m², pile height 14 mm), Shelter® B-200 insulation with metalized film.
• Heel lining features a split pocket with a pad made from unwoven fabric.
• Multi-layered insulation material for removable insole.
• The boots feature retroreflective trimming to improve visibility.
• Composite toe cap protects forefoot against impacts of 200 J (MIL 200) due to a special pad that prevents pressure on the foot.
• To protect against punctures, non-metallic anti-puncture midsoles (1200 N) are used.
• Two-layer oil-, gasoline- and acid-alkali-resistant outsole (resistant to aggressive materials, such as oils and petrochemicals, acid and alkali solutions with up to 20% concentration).
  • Shock-absorbing polyurethane midsole reduces shock loads and makes the footwear light, comfortable and highly heat-resistant.
  • The lower layer of the outsole is made of wear-resistant, heat-resistant (60 s / 300°С) and frost-resistant (–45°С)  nitrile rubber, which additionally resistant to deformation and chafing.
  • The 4,5 mm cleated outsole ensures good traction to various surfaces providing protection against sliding on wet and oily surfaces and the angle-wise cleat pattern provides self-cleaning of the sole.
• The boots are recommended for outdoor jobs in climate zones  I-II, III, IV and a special climate zone when completed with the outfit providing relevant thermal insulation.
• The range of sizes and widths are manufactured on the basis of the last form used for footwear manufacturing, to ensure comfort and fatigue-free working throughout the day.

This model has received a voluntary certificate confirming protection against cuts to the upper part of the shoe in accordance with the requirements of GOST ISO 20345-2024 (clause 6.2.8).

Upper: genuine leather.
Lining - multi-layer insulation– faux fur on a knitted base with wool pile (70% wool, 30% polyester, density 640 g/m², pile height 14 mm), Shelter® B-200 insulation with metalized film.
Toe cap: composite 200-joules material.
Multi-layered insulation material for removable insole.
Penetration resistant midsole: non-metallic (1200 N).
Outsole: two-layer, PU + nitrile rubber
Cleat depth: 4.5 mm
Assembly: molding.
Height: 295 ± 5 mm.
Width: 9, 10.
Color: black.
Sizes: 35 to 48.

TR CU 019/2011