ELIPSE INTEGRA
half-face mask featuring eye protection, with filters P3 sized M/L (SPR406IFUB)

The first half-face mask tested and approved as combined respiratory and eye protection in accordance with EN140.

• Polycarbonate shield with a coating protecting against fogging and scratches, withstands impacts of particles flying at a speed up to 45 m/s.
• Compact, lightweight and elastic half-face mask ideally fits the face and provides full field of vision.
• The mask shell is made from soft TPE (Thermo Plastic Elastomer) for medical purposes which causes no allergic reactions. Silicone-free.
• A large central reverse exhalation valve reduces respiratory resistance and minimizes moisture accumulation inside the mask.
• Lightweight headband straps are easily adjustable in 4 positions and provide secure attachment.
• Replaceable pleated filters P3 provide efficiency of at least 99.95% for the particle size ≥0.3 mm and respiratory resistance of 4.2 mbars for each filter flow rate of 47.5 l/min. The maximum respiratory resistance of filled up filter is 7 mbars. Among similar aerosol filters, HESPA® Technology by GVS is that ensures high filter efficiency and low respiratory resistance.
• Protection against dust and fumes containing: microorganisms; marble; gypsum; titanium oxide; mineral wool; wood; synthetic detergents; textile fibers; spices; salt; forage; asbestos, bauxites, and iron dust; toxic dust from manganese, lead, chromium; coal dust; silicon oxide; graphite; kaolin; zinc; aluminum, etc.
• The mask is supplied complete with filters immediately ready to use. Filters are easily replaceable.
• The mask sizes S/M are also available.

Recommended industries: mining; metallurgy; casting; shipbuilding; automotive; cement, glass, and ceramics production; asbestos fiber and heavy metal handling; metalwork; construction.

Level of protection: Р3 against aerosols up to 50 MPC.
Operating temperature range: −30°С to +70°С.
Maximum weight of full assembly: 209 g.
Shelf life: 5 years
Country of manufacture: United Kingdom.

TR CU 019/2011
EN 140:1998
EN 166 2.F.K.N.
EN 143:2000/A1 P3 (RD)