UNIGARD
men's perforated low ankle leather boots

This item is available in the following regions: Kazakhstan Russia Middle East

The boots are manufactured by moulding polyurethane and thermoplastic polyurethane to the shoe upper.
The shoe upper is made of genuine leather (1.8–2.0 mm thick).

Lining made of polyester fabric with polyurethane foam, polyester fabric and lining membrane fabric, it is resistant to abrasion and capable of actively absorbing and removing moisture from the foot.
Instep and heel natural leather straps with Velcro strap closure.

Fabrics of the insole absorb moisture effectively making the boots comfortable to wear.
A composite toe cap protects the forefoot against impacts of 200 J (MIL 200) due to a special pad that prevents pressure on the foot.

Two-layer oil-, gasoline- and acid-alkali-resistant outsole (resistant to aggressive materials, such as oils and petrochemicals, acid and alkali solutions with up to 20% concentration).

Shock-absorbing polyurethane midsole reduces shock loads and makes the footwear light, comfortable and highly heat-resistant.
The bottom layer is made of wear-resistant thermoplastic polyurethane (the temperature range for use of the material is –40...+120 °C) with a translucent effect, resistant to deformation and abrasion.

The 3,0 mm cleated outsole ensures good traction on various surfaces providing protection against sliding on wet and oily surfaces and the angle-wise cleat pattern provides self-cleaning of the sole.

The range of sizes and widths are manufactured based on the last form used for footwear manufacturing, to ensure comfort and fatigue-free working throughout the day.

Upper: genuine leather
Lining: polyester fabric
Inside protective toe cap: composite
Removable insole (footbed): foamed polyester+polyurethane
Outsole: PU/TPU
Cleat depth: 3 mm
Assembly: moulding
Fastening type: instep and heel natural leather straps with Velcro strap closure
Colour: black
Width: 9
Sizes: 40 to 47
Height: 80 ±5 mm
Half pair weight: 1060 ±50 g