No region selected select region

TECHNOAVIA
group


Select your region:

Menu

NEOGARD
men’s knee-high boots combined with multi-layered insulator

This item is available in the following regions: Russia Middle East Kazakhstan

 

Boots are manufactured is manufactured by direct molding of the polyurethane and nitrile rubber sole.

  • The shoe upper is made of  genuine "Russia" leather (1.8 - 2.0 mm thick).
  • The collar is made from water-repellent material (100% polyester). Its width is adjustable with a buckle ensuring a tight fit of the collar to the leg; the flap made from genuine leather prevents an ingress of dust, snow and moisture inside. The collar features a drawstring fastener in the upper edge to prevent an ingress of snow and sundries inside.
  • Multi-layered insulation material for lining and removable insole.
    • Vamp lining and heel counter is made from trippled material (faux fur on knitted base layer with wool blend fleece (70% wool , 30% polyester fiber, density 640 g/m2, pile height 14 mm), metallized film - foil with polypropelene lining). Heel lining features a split pocket with a pad made from unwoven fabric.
    • Collar lining is made from trippled material (faux fur on knitted base layer with wool blend fleece (wool 70%, 30% polyester fiber, density 640 g/m2, pile height 14 mm), synthetic insulation material, metallized film).
  • Composite toe cap protects forefoot against impacts of 200 J (MIL 200) due to a special polyurethane pad that prevents pressure on the foot.
  • Two-layer outsole (resistant to chemical factors, such as oils, petrochemicals, alkali with a concentration of up to 20%).
    • Shock-absorbing polyurethane upper layer of the outsole reduces shock loads and makes the footwear light, comfortable and highly heat-resistant. The toe has an additional polyurethane protective patch.
    • The outsole is made of wear-resistant, frost-resistant (−40°C) and heat-resistant (300°C / 60 s) nitrile rubber, which additionally provides enhanced resistance to deformation and chafing.
    • The 5.0 mm lug sole ensures good traction to various surfaces and the angle-wise tread pattern provides self-cleaning of the sole.
  • The range of sizes and widths are manufactured on the basis of the last form used for footwear manufacturing, to ensure comfort and fatigue-free working throughout the day.

Upper: genuine leather.
Lining: multi-layer material.
Inside protective toe cap: composite (MIL 200).
Outsole: two-layer sole (polyurethane + nitrile rubber). Resistant to short impact of high temperatures (300°Ń for 60 s).
Assembly: molding.
Color: black.
Height:  370±5 mm.
Width: 10.
Sizes: 41-47.

The boots are recommended for outdoor jobs in climate zones  I-II, III, IV and a special climate zone when completed with the outfit providing relevant thermal insulation.

NEOGARD mens knee-high boots combined with multi-layered insulator
NEOGARD mens knee-high boots combined with multi-layered insulator
NEOGARD mens knee-high boots combined with multi-layered insulator
NEOGARD mens knee-high boots combined with multi-layered insulator

Food Manufacturing Shoes

NEOGARD mens knee-high boots combined with multi-layered insulator
SKU: 5.331
NEOGARD men’s knee-high boots combined with multi-layered insulator
ALBUS insulated boots
SKU: 50.077
TANKER S5 SRC
SKU: 27.063
POSEIDON S4 SRA
SKU: 27.102
Smooth OB E ESD A SRC
SKU: 27.070
SONIC OB A ESD E SRC
SKU: 27.073
BESTCLOG OB
SKU: 27.067
BESTLIGHT1 OB
SKU: 27.068
BEN S3 SRC
SKU: 27.126
BRADLEY S1P SRC
SKU: 27.127
NATURAL S3 SRC ESD
SKU: 27.111
NIAGARA S3 SRC ESD
SKU: 27.112
SHANGHAI S1P SRC ESD
SKU: 27.122
POLYGARD Boots
SKU: 50.246
PRISMA-2 PVC boots
SKU: 50.000
PRISMA-2 PVC boots
SKU: 50.001