URAL MASTER
padded welder work suit, protection class 2

This item is available in the following regions: Kazakhstan Russia Middle East

Jacket + trousers

Class 2 protection against sparks, weld spatter and slag

Protective properties:

Tp, class 2 protection from sparks and splashes of molten metal
Тт – convective heat resistance, B2 level
Ти – radiant heat protection, C2 level
То – protection against limited flame exposure (А1+А2 – limited flame spread)
Тп – contact with heated surfaces protection, level F1
Тнв – cold weather and wind protection, class 3(4) (for operation in IV and a special climate zones)
Ми – from mechanical impacts and
general industrial contamination – З

Black work suit with yellow piping, contrasting seams and triangular reflective inserts give the product a dynamic look. Yellow color warns of increased risk of the performed works.

Jacket:

The coat overlaps 20 cm of thigh
The right-hand concealed central closure of the coat with buttonholes, with an additional internal protective placket on the left, under the central fastener, allows you to weld both "right-handed" and "left-handed" - reliable protection against the penetration of sparks into the underwear space.
The concealed closure ensures a neat appearance and excludes contact of the accessories with equipment and tools; if sparks hit, the buttons do not burn.
A storm placket on a removable insulation – protection from the cold.
The design of the sleeve repeats the main working position of the welder's hand when performing work, so that the hands get less tired.
Windproof flaps at the bottom of the sleeves with a fire-retardant Velcro fastener to adjust the width and make it easier to put on the leggings.
Sleeves with rib-knit cuffs on a removable insulation jacket are made of fire-resistant knitwear provide additional protection against sparks and protect against wind blowing.
The stand-up collar with Velcro fastener is insulated with one layer of insulation. The inside of the band collar is made of fire-retardant fleece – warm and cozy.
Convenient pockets:
- the design of the side pockets in the seams of the jacket prevents metal splashes and scale from getting into the pocket;
- 2 internal chest patch pockets on a removable jacket insulation, for documents, with a loop and button closure.
Detachable lined hood without insulation.
Removable insulation with a knitted stand-up collar provides a good fit around the neck, warmth and comfort.

Trousers:

Trousers with a detachable, insulated lining with a high waistband for thermal protection.
Zip-fly trousers with a loop and a button on the waistband.
Waistband with five loops for wearing with a belt.
Side seams flaps to adjust the volume at the waist.
Additional space in the knee area and undercut on backside of the legs to prevent creases.
Patch pocket with a flap.
Loop-holders for tools along the side seams, in the thigh area, for ease of use.
Vents along the bottom of the inseams of the removable insulation with ties – for ease of wearing with shoes.
New!
Curved bottom of the trousers with a bend in the front to reduce the number of wrinkles when moving, the arch in the back covers the shoes in the working position.
Bib-trousers with inserts made of elastic tape.

Outer layer fabric: Frall 440 FR (100% cotton), with oil and water repellent and flame retardant finish, weight 500 g/m², black.
Outer fabric: Frall 330 FR (100% cotton), with oil and water repellent and flame retardant finish, weight 350 g/m², black.
Insulation: Flytex FR (100% polyester), density 150 g/m², jacket – 3 layers, trousers – 2 layers.
Removable insulation lining calico (100% cotton).
Windproof fabric: 100% polyester.
Retroreflective elements: retroreflective inserts made of fire-retardant material.
Color: black combined with yellow.
Sizes: 88-92 to 128-132, Heights: 158-164 to 194-200.