Products for Europe are displayed. change region

TECHNOAVIA
group


Select your region:

Menu

SIBERIA-3
men's insulated jacket

This item is unavailable in Europe region.

Protective properties:

  • Òíâ protection against reduced air temperatures and wind, Class 4
  • Ìè Ç protection against mechanical impacts (abrasion) and general industrial contamination

Key features:

  • Jacket with 3-layer insulation (3×120 g/m2): 1 layer stitched and 2 layers on a removable insulating lining.
  • Straight fit.
  • Removable hood, fastened to the neck of the jacket with a zipper, adjustable in two directions – along the faceline with a drawstring and in height with a Velcro patch.
  • The hood with a single layer of insulation and a soft fleece lining protects from the cold.
  • A detachable faux fur trim and a high chin part of the hood protect the face from precipitation and wind.
  • The stand-up collar is lined with soft fleece for comfort.
  • Central fastener with a strong two-way zipper with a windproof valve, which is fixed with secret snaps. Double slider zipper allows unzipping from the bottom for convenient driving and working in a sitting position.
  • The inner placket wraps around the top of the zipper slider and, thanks to the fleece trim on the top, prevents the zipper from touching the skin.
  • The sleeve construction  corresponds to the main position the arm takes while working, making it more comfortable to work and therefore the arms get less tired.
  • Sleeves with cuffs that are lined with fleece on the inside. The volume of the cuffs is adjusted with Velcro tabs.
  • Rib-knit cuffs on the sleeves of removable insulation keep you warm.
  • Zippered mesh in the armholes for thermal comfort.
  • Drawstrings at the waistline and at the bottom of the jacket, as well as a drawstring at the waistline of a removable insulating lining, allow you to adjust the volume of each part of the garment, providing a better fit and additional protection against wind and cold.
  • Lining on removable insulation on the back and upper parts of the shelves – with "smart" thermoregulation technology: a special dotted silver coating effectively reflects the heat of the human body, which increases the heat-preserving properties of the garment without increasing the thickness of the insulation.
  • Removable insulation is attached to the jacket with a zipper and lace with snaps.
  • Outer pockets:
    • 2 chest oblique-vertical with zippers;
    • 2 lower pockets with volume, with flaps on snap buttons, with two openings – from above and from the side, the side opening is fixed with a concealed snap
    • 1 zippered pocket on the lower part of the left sleeve with – for a pass;
    • 1 inside A4 breast pocket with a zipper under the outer flap – no need to unbutton the jacket to get your documents.
  • Inside front pockets with both stitched and removable lining:
    • 2 chest pockets with zippers with additional compartments for a smartphone and keys (inside – a cord with a carabiner);
    • 1 inner, located at the bottom left, made of mesh, pulled together with elastic band on top and fixed with a button.
  • To increase visibility at night, the jacket features  retroreflective inserts and piping below the yokes and in the lower part of the sleeves in front and back - it perfectly indicates the position of a person in the dark.

Outer layer fabric: POLYRIB H (100% polyamide), membrane (Lt-membrane™ , water resistance – 6,000 mm waterproof rating, water vapor permeability – 6,000 g/m2 per 24 hours, windproof, breathable, cold-resistant, water repellent coating, density 180 g/m2.
Insulation: Shelter® Micro 150 g/m2, 3 layers. The multi-layer insulation provides a greater heat-insulating effect due to the air gap between the layers.
Hood trimming: faux fur.
Lining: 100% polyester, density 60 g/m2, combined – black and with a special silver dot coating, which, by reflecting the heat of the human body, allows you to keep it under the garment.
Retroreflective elements: retroreflective inserts and piping.
Color: black, trimming – dark gray.

TR CU 019/2011

Class 4 protection against reduced air temperatures and wind

Details:

Lining with silver dot coating
Lining with silver dot coating
2 lower pockets openings - from the top and from the side seam
2 lower pockets openings - from the top and from the side seam
Flaps are fixed on concealed magnetic snaps
Flaps are fixed on concealed magnetic snaps
A convenient mesh pocket
A convenient mesh pocket
Waistline drawstring for volume adjustment
Waistline drawstring for volume adjustment
Hem line drawstring for volume adjustment
Hem line drawstring for volume adjustment
Functional inner pockets
Functional inner pockets
Functional inner pockets
Functional inner pockets
Thermal padding on back and shoulders
Thermal padding on back and shoulders
A4 pocket under the wind flap - no need to unbutton the jacket
A4 pocket under the wind flap - no need to unbutton the jacket
Double slider zipper
Double slider zipper
Zipped pocket on the left sleeve
Zipped pocket on the left sleeve
Internal collar lined with fleece
Internal collar lined with fleece
SIBERIA-3 men's insulated jacket
SIBERIA-3 men's insulated jacket
SIBERIA-3 men's insulated jacket
SIBERIA-3 men's insulated jacket
SIBERIA-3 men's insulated jacket
SIBERIA-3 men's insulated jacket

Cold Weather Workwear

NORD trapper hat
SKU: 8.122